DIAMOND COATED POINTS

Red Tiger Diamond Tools

DIAMOND COATED POINTS

Red Tiger diamond coated engraving points " burs " come in a variety of shapes and sizes.

Fast cutting and resistant to clogging they offer the ability to create intricate cuts in glass, jade, porcelain, ceramic, tile, slate, metals, etc.

Red Tiger accessories are for use with flexible shaft machines or hand-held rotary tools, such as Dremel, Foredom, Pfingst and Gesswein.

Maximum RPM: 20,000

Shank Diameter: 1/8"

Standard Grit Size: 120

Always Wear Proper Eye Protection

CAUTION: - Never use the mounted points at speeds above the maximum RPM.

Always use dust collection, respirator or a face mask to prevent inhalation of dust particles from workpiece or abrasives.

Always seat the shank of the point into the collet or chuck of the handpiece as far as possible to provide proper support.

Never use any accessory that appears to be bent, damaged, loose, out-of-balance or vibrates excessively.

Let the tool do the work. Do not force the tool or use excessive pressure.