diamond drill bits for glass block tile - KHUE.COM ®
/ khue.com store front / departments / hand tools /

DIAMOND GLASS DRILL BITS

 

 

 



Red Tiger Diamond Tools ®



- 17 Sizes Available !

 

 



- drilling in ceramic tile

Red Tiger- Diamond Coated Drill Bits Red Tiger Diamond Tools ®
- can be used on glass, glass block, bottles, tile and ceramic.

They are designed to be used wet. A pool of water or coolant should surround the bit when in use. This will promote efficient cutting and longer life.

These quality diamond drills where designed for a cost effective method of general glass and tile drilling.

Rigid steel body and longitudinal thru holes for easy ejection of drilled cores.


Shank Diameter: 1/4"

Recommended RPM:

4 MM - 14 MM = 1600 - 2000
16 MM - 25 MM = 1400 - 1600
27 MM - 50 MM = 1100 - 1400

Millimeters - Inches Size Conversion Chart Below

 

 


4 MM Diamond Core Drill Bit
Price: $ 13.75
item # DRL1004

QTY:



6 MM Diamond Core Drill Bit
Price: $ 14.75
item # DRL1006

QTY:



8 MM Diamond Core Drill Bit
Price: $ 15.75
item # DRL1008

QTY:



10 MM Diamond Core Drill Bit
Price: $ 16.75
item # DRL1010

QTY:



12 MM Diamond Core Drill Bit
Price: $ 17.75
item # DRL1012

QTY:



14 MM Diamond Core Drill Bit
Price: $ 18.75
item # DRL1014

QTY:



16 MM Diamond Core Drill Bit
Price: $ 19.75
item # DRL1016

QTY:



18 MM Diamond Core Drill Bit
Price: $ 20.75
item # DRL1018

QTY:



20 MM Diamond Core Drill Bit
Price: $ 21.75
item # DRL1020

QTY:



22 MM Diamond Core Drill Bit
Price: $ 22.75
item # DRL1022

QTY:



25 MM Diamond Core Drill Bit
Price: $ 23.75
item # DRL1025

QTY:



27 MM Diamond Core Drill Bit
Price: $ 24.75
item # DRL1027

QTY:



30 MM Diamond Core Drill Bit
Price: $ 25.75
item # DRL1030

QTY:



35 MM Diamond Core Drill Bit
Price: $ 26.75
item # DRL1035

QTY:



40 MM Diamond Core Drill Bit
Price: $ 27.75
item # DRL1040

QTY:



45 MM Diamond Core Drill Bit
Price: $ 28.75
item # DRL1045

QTY:



50 MM Diamond Core Drill Bit
Price: $ 29.75
item # DRL1050

QTY:


 


 


 


Millimeters - Inches Approximate Equivalents

4 MM
6 MM
8 MM
10 MM
12 MM
14 MM
16 MM
18 MM
20 MM
22 MM
25 MM
27 MM
30 MM
35 MM
40 MM
45 MM
50 MM

1/8 Inch
1/4 Inch
5/16 Inch
3/8 Inch
1/2 Inch
9 /16 Inch
5/8 Inch
3/4 Inch
13/16 Inch
7/8 Inch
1 Inch
1 1/16 Inch
1 3/16 Inch
1 3/8 Inch
1 9/16 Inch
1 3/4 Inch
2 Inch

- drilling in glass blocks

/ conversion table

 

 


 

CAUTION: - An excess of HEAT, SPEED or PRESSURE can cause premature failure of any drill bit.

 

Always apply coolant to the drill point. Cooling the drill bit can be accomplished by either submerging in a dish of water while drilling, or building a localized reservoir using putty or a caulking compound. For best results, a steady flow of water over the area being drilled.

To start a hole, begin by gently kissing the glass until clouding appears, increase the pressure and continue drilling. Throughout the drilling cycle, oscillate the drill up and down, decrease pressure near the finish.

For the best results use in a drill press.

 

Caution: Always Wear Proper Eye Protection

 

 


Online - tools for sale

 

 KHUE.COM
HUE STAINED GLASS ®